Level your refrigerator

1. Locate the leveling legs, which are underneath the front of the fridge. There are two leveling legs for leveling and holding the fridge in place. 
2. To adjust the height of the left side, insert a flat-head screwdriver into the leveler (or notch) of the front leg on the left side. Turn the leveler clockwise to raise and counterclockwise to lower.
   
3. To adjust the height of the right side, insert a flat-head screwdriver into the leveler (or notch) of the front leg on the right side. Turn the leveler clockwise to raise and counterclockwise to lower.
   
4. Using a carpenter's level, make sure the fridge is level from left to right and front to back. Make sure to check the level of the main unit and not the doors.
5. If the fridge is not level, determine which side is higher, and on that side, adjust the leveling leg and check it again. Continue to make adjustments until the fridge is level.

 If you need to raise the rear side of the refrigerator to level it, you can use the provided level adjustment pad(s). This may be needed if you have a refrigerator with Auto Open Door. Follow these instructions to raise the rear side of the refrigerator:

1. Choose the position on the floor where you need to attach the level adjustment pad.
   
   
   
   
2. Peel the double-sided tape on the bottom of the level adjustment pad.
3. Attach the level adjustment pad to the floor.
4. If you need to further raise the rear height, attach another adjustment pad