AutoRelease door does not open automatically

The Waterwall reflector error (7E or 7C) occurs on your dishwasher when the WaterWall reflector is unable to move. This means something is blocking or holding it in place. It can also happen if it has not been reattached correctly. This can be easily fixed by removing obstructions and reattaching the reflector correctly.

If your dishwasher isn't draining, you will need to check the sink's drain for clogs and blockage caused by food, debris and waste, and that the drain hose connection to the sink is straight, not pinched shut, kinked, bent or damaged. Depending on your local regulation, the hose may be connected to the sink with an air gap, or have a high loop to p

When your dishwasher turns on by itself, it is nothing to be alarmed about, there is actually a very simple explanation. The capacitive touch buttons on your dishwasher are very sensitive. While loading and unloading the dishwasher, brushing against the control panel could set a cycle. The dishwasher will start by itself once the door is closed.