Samsung dishwasher is displaying an error code
Here's our reference list for dishwasher error codes, including troubleshooting steps to resolve them or links to the relevant guides.
Samsung dishwasher will not turn on
When your dishwasher doesn't turn on, it could be nothing to fret about. It could just be a tripped circuit breaker or a switch that needs to be flipped. There are a few things to check out to get your dishwasher back up and running.
Samsung dishwasher will not turn on
Important
If the issue has been occurring since installation, service is not required. Contact the installer to verify that the proper electrical requirements are met. For more information, see the installation guide.
1
Touch Power on the dishwasher.
The dishwasher has a Power button that has to be pressed before a cycle can be selected or started. Also, if your hands are wet or soapy, it may not recognize that it has been touched. Make sure your hands are dry when you touch the buttons on the control panel.
The Power button should be clean as well. If it's dirty or covered in grime, gently wipe it clean with a soft damp cloth, and try again.
Important
If your dishwasher turns on with the Power button, but won't start when you touch Start, see our article for Dishwasher doesn't start or fill with water.
2
Check the circuit breaker.
Check the circuit breaker for any tripped circuits. If you see one, flip the circuit all the way off and back on again. If it continues to trip, contact an electrician to diagnose the issue.
3
Check the switch near the dishwasher.
Most newer homes have a switch (like a light switch) on the wall in the kitchen near the dishwasher. This switch turns the power on and off for the dishwasher. If your home has this switch, verify it is in the on position.
4
Request service.
If the dishwasher still doesn't turn on, visit the Support Center to request service.
Recommended Articles
Samsung dishwasher is not draining
If your dishwasher isn't draining, you will need to check the sink's drain for clogs and blockage caused by food, debris and waste, and that the drain hose connection to the sink is straight, not pinched shut, kinked, bent or damaged. Depending on your local regulation, the hose may be connected to the sink with an air gap, or have a high loop to p
Samsung washing machine will not start or fill with water
Your washer door locks to prevent water from coming out (especially for front load models). Child Lock also will lock the door on some models, like front loaders. Normally waiting for the cycle to end is all you need to do to unlock the door, or turn your washer on if it's off. If you get stuck, though, you can drain the water from front load washe
We're here for you
Contact Samsung Support
Contact us online through chat and get support from an expert on your computer, mobile device or tablet. Support is also available on your mobile device through the Samsung Members App.
